Ductless A/C

InverterFlex Systems

InverterFlex SystemsMulti-zone ductless mini-split

Comfort-Aire’s InverterFlex multi-zone units let you condition two, three or four rooms—or one large space— with just one outdoor unit.

A single outdoor condenser is sized for multiple indoor air handlers, 9,000 and 12,000 BTUH, which can be mixed and matched to reach the total system capacity.

InverterFlex models incorporate all the advantages of inverter technology. The compressor speed is variable, depending on the load demand. To save energy, the unit runs at low RPMs, only ramping up to higher RPMs when the demand is necessary. This eliminates temperature fluctuations and the cycling of the compressor on and off. Indoor air quality is also improved because air is constantly being pulled through the filters and dehumidified.


‘S’ Series Single Zone

'S' Series Single ZoneSingle Zone Ductless Mini-Splits

Our “S” Series of ductless mini-splits, rated at 13 SEER, is ideal for locations where it’s too expensive or impractical to install ductwork to add air conditioning…or where a window air conditioning unit can’t be used.

The indoor unit of the “S” Series includes a Temperature Compensation feature that automatically adjusts to eliminate temperature stratification between ceiling and floor temperatures.

These cost-competitive systems are ideal for bedrooms, sunrooms, offices, arena skyboxes, historical properties, warehouse offices and more. A hole approximately 3-inches in diameter is all that’s needed to connect the indoor and outdoor units.

The single zone “S” Series comes in cooling only and heat pump models, from 9,000 to 24,000 BTUH.


‘V’ Series Inverter

'V' Series InverterInverter Technology for efficiency and comfort

Our “V” Series mini-splits utilize inverter technology to reduce temperature fluctuations while saving up to 40% on energy consumption (compared to a standard mini-split).

Basically, the inverter allows the compressor to run at variable speeds to match the demand, providing precise temperature control.

Most of the time the unit runs at a low “economy” speed to maintain the temperature and humidity levels. During times of high demand, the compressor ramps up automatically to a higher speed.

Inverter units reach SEER levels as high as 19.30 for real energy efficiency.

All sizes are available in heat pump models, ranging from 9,000 to 36,000 BTUH.

Mini-splits are the ideal solution for conditioning areas where adding ductwork is impractical or too expensive. This includes older homes, bedrooms, sunrooms, additions, office spaces, computer rooms, sports arena skyboxes, and interior warehouse offices, to name just a few.

Mini-splits are easily installed with the condensing unit located outside and the air handler(s) mounted inside. A hole less than 3″ in diameter is all that’s required to connect lines and wires between the outdoor and indoor components. Units come pre-charged with environmentally friendly R-410A.


DMC Series Ceiling Cassette

DMC Series Ceiling Cassette24,000 AND 36,000 BTUH COOLING ONLY DUCTLESS MINI-SPLIT

Ideal for locations where it’s too expensive or impractical to install ductwork, or where a window A/C can’t be used, a ductless mini-split provides the effectiveness of a split system without the problem of adding ducting.

Our ceiling cassettes are inconspicuous when installed. At just 9″ deep, they install easily into a ceiling while the outdoor condenser is simply connected through a 3″ hole in the wall.

The DMC Series offers quiet operation. The split system design keeps operational sound outside while the indoor unit motor and fan are ultra-quiet.

Available in cooling-only models, 24,000 and 36,000 BTUH.



Return to All Cooling Solutions